EN
W415-1707 / 07.04.17
33
venting installation
Type 1 (x2)
The vent shield is telescopic and must be adjusted to shield at least the first 15” of vertical vent always used.
FOR SEE-THRU APPLIANCES, REPEAT STEPS WITH THE OPPOSITE SIDE. (Two vent shields required)
Fig. 1
Fig. 2
Fig. 3
1. Unscrew the fasteners on the vent shield assembly. DO NOT DISCARD FASTENERS (Figure 1).
2. Adjust vent shield to its a minimum of 15” (Figure 2).
3. Use the fasteners in step 1 to hold the new vent shield height (Figure 3).
4. Unscrew the fasteners as shown in Figure 4. DO NOT DISCARD FASTENERS
5. Use the fasteners in step 4 to secure the vent shield to the appliance (Figure 5).
6. Secure the vent shield with two fasteners (supplied) to the front upper frame (Figure 6).
note:
5.6 vent shield installation
Fig. 4
Fig. 5
Fig. 6
SEE-THRU EXAMPLE
