Insert each pole into the corresponding
colored pockets in the following order:
• GREEN (front-to-back) pole
• BLACK (corner-to-corner) poles
• GREY (side-to-side tailgate) pole
Locate the front of the rainfly that goes over the door (it will have a black Backroadz tag
on the side). Drape the rainfly over the tent.
Secure the rainfly strap clips to the tent (2 per side and 2 at the tailgate) and tighten if
necessary.
10
11
Assemble the tent poles by
unfolding each section.
POLE
LOCATION
Black Poles
Corner-to-Corner
Green Pole
Front-to-Back
Grey Pole
Vestibule/Tailgate
Insert the poles into the corresponding color sleeve in the following
order
(do not place the poles in the corner pockets at this time)
:
•
Insert the BLACK pole diagonally, corner-to-corner on the roof
of the tent. Repeat with the other black pole.
•
Insert the GREEN pole front-to-back on the roof of the tent.
•
Insert the GREY pole side-to-side at the front (tailgate)
of the tent. Ensure the tailgate pole is even on both sides.
NOTE: The poles may get
stuck in the sleeve. Do not
force them – gently guide
the pole through the
fabric sleeve.
4
5
Once the tent is fully raised, attach the
pole clips to the poles.
7
If the tent straps on the side of the tru
ck are too loose, pull to tighten.
Ensuring not to make them too tight.
To install the gear loft, place each
corner hook of the gear loft into the
loop located on the ceiling of the tent.
8
9
6
ATTACHING THE RAINFLY
GREEN
BLACK
BLACK
GREY
NOTE: Ensure tailgate pole is set-up on
the outside of the tailgate wires. (If pole
is set up inside the tailgate wires it will
create too much tension and may cause
pole to break).
