NAPCO iSecure ISEC-WL-KEYPAD, Руководство по эксплуатации

Страница: 24 / 28

24
T R O U B L E S H O O T I N G
What do I do if... For more info...
I try to arm my system but the keypad just displays a P and beeps at me.
If the green STATUS light is off, a zone is open. Refer to the pull up zone directory and find and
secure the open window or door.
See Page 7
I try to arm my system but the keypad displays a P and beeps at me. The yellow TROUBLE light is
lit and numbers start scrolling in the Window display.
A System Trouble has been detected. Note the scrolling error codes, which represent the trouble.
Press RESET and you will now be able arm to the system , but the trouble must be fixed as soon
as possible.
See Page 6 & 21
The Fire Alarm is sounding and I don't know how to turn it off.
If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire Department
from an outside telephone. If there is no evidence of a fire, enter your User Code and press EN-
TER to silence the alarm. Note the number of the Zone flashing in the keypad Window dis-
play. Check the smoke detector(s). If a smoke detector tripped, its red alarm indicator light will
be on. Press RESET to silence the keypad sounder.
See Page 12
" Lb " appears in the keypad Window display.
" Lb " indicates a keypad " Low battery" . Replace the keypad battery (or batteries) as soon
as possible. Replace with minimum one Energizer 3V size 123 lithium battery. To extend the
time interval between replacements, install two fresh batteries. Important: When installing two
batteries, ALWAYS install two fresh batteries; do not install a fresh second battery after a single
battery has already been in use. Nominal battery life is 1 year when one battery is used; 2 years
when two batteries are used.
See Page 25