NAPCO iSecure ISEC-WL-KEYPAD, Руководство по эксплуатации

Страница: 12 / 28

12
F I R E P R O T E C T I O N
(Applicable only where local ordinances permit use of this alarm system for fire protection).
Fire-Zone Alarm
If a fire is detected, the Hub red FIRE light will flash, the ISEC-WL-KEYPAD will flash the word
FIRE (along with the zone number) and the keypad sounder will pulse.

If a fire is in progress, evacuate the premises immediately! If necessary, call the Fire
Department from an outside telephone.

If there is no evidence of a fire, enter your User Code and press ENTER to silence the alarm.

Check the smoke detector(s). If a smoke detector tripped, its red alarm indicator light will be
on.

After the alarm condition is corrected (thermostat cooled down; smoke cleared from detector;
etc.), pressing RESET will reset the keypad within about 10 seconds.
F
ire-Zone Trouble

The system is constantly monitoring the fire zone(s) to ensure they are in good working order.

If a problem on a fire zone is detected, a system trouble E-41-NN will display, followed by the
number of the fire zone in trouble (" NN "). The sounder will activate and the TROUBLE icon
will appear.

Press RESET to silence the sounder. Call for service immediately!
41
08