background image

48 

NAPCO SECURITY TECHNOLOGIES, INC. (NAPCO) warrants its products to be free from 

manufacturing defects in materials and workmanship for thirty-six months following the date of 

manufacture. NAPCO will, within said period, at its option, repair or replace any product failing to 

operate correctly without charge to the original purchaser or user. 

This warranty shall not apply to any equipment, or any part thereof, which has been repaired by 

others, improperly installed, improperly used, abused, altered, damaged, subjected to acts of 

God, or on which any serial numbers have been altered, defaced or removed. Seller will not be 

responsible for any dismantling or reinstallation charges. 

THERE ARE NO WARRANTIES, EXPRESS OR IMPLIED, WHICH EXTEND BEYOND THE 

DESCRIPTION ON THE FACE HEREOF. THERE IS NO EXPRESS OR IMPLIED WARRANTY 

OF MERCHANTABILITY OR A WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE. 

ADDITIONALLY, THIS WARRANTY IS IN LIEU OF ALL OTHER OBLIGATIONS OR 

LIABILITIES ON THE PART OF NAPCO. 

Any action for breach of warranty, including but not limited to any implied warranty of 

merchantability, must be brought within the six months following the end of the warranty period.  

IN NO CASE SHALL NAPCO BE LIABLE TO ANYONE FOR ANY CONSEQUENTIAL OR 

INCIDENTAL DAMAGES FOR BREACH OF THIS OR ANY OTHER WARRANTY, EXPRESS 

OR IMPLIED, EVEN IF THE LOSS OR DAMAGE IS CAUSED BY THE SELLER'S OWN 

NEGLIGENCE OR FAULT. 

In case of defect, contact the security professional who installed and maintains your security 

system. In order to exercise the warranty, the product must be returned by the security 

professional, shipping costs prepaid and insured to NAPCO. After repair or replacement, NAPCO 

assumes the cost of returning products under warranty. NAPCO shall have no obligation under 

this warranty, or otherwise, if the product has been repaired by others, improperly installed, 

improperly used, abused, altered, damaged, subjected to accident, nuisance, flood, fire or acts of 

God, or on which any serial numbers have been altered, defaced or removed. NAPCO will not be 

responsible for any dismantling, reassembly or reinstallation charges. 

This warranty contains the entire warranty. It is the sole warranty and any prior agreements or 

representations, whether oral or written, are either merged herein or are expressly canceled. 

NAPCO neither assumes, nor authorizes any other person purporting to act on its behalf to 

modify, to change, or to assume for it, any other warranty or liability concerning its products. 

In no event shall NAPCO be liable for an amount in excess of NAPCO's original selling price of 

the product, for any loss or damage, whether direct, indirect, incidental, consequential, or 

otherwise arising out of any failure of the product. Seller's warranty, as hereinabove set forth, shall 

not be enlarged, diminished or affected by and no obligation or liability shall arise or grow out of 

Seller's rendering of technical advice or service in connection with Buyer's order of the goods 

furnished hereunder. 

NAPCO RECOMMENDS THAT THE ENTIRE SYSTEM BE COMPLETELY TESTED WEEKLY. 

Warning: 

Despite frequent testing, and due to, but not limited to, any or all of the 

following; criminal tampering, electrical or communications disruption, it is possible for the system 

to fail to perform as expected. NAPCO does not represent that the product/system may not be 

compromised or circumvented; or that the product or system will prevent any personal injury or 

property loss by burglary, robbery, fire or otherwise; nor that the product or system will in all cases 

provide adequate warning or protection. A properly installed and maintained alarm may only 

reduce risk of burglary, robbery, fire or otherwise but it is not insurance or a guarantee that these 

events will not occur. CONSEQUENTLY, SELLER SHALL HAVE NO LIABILITY FOR ANY 

PERSONAL INJURY, PROPERTY DAMAGE, OR OTHER LOSS BASED ON A CLAIM THE 

PRODUCT FAILED TO GIVE WARNING. Therefore, the installer should in turn advise the 

consumer to take any and all precautions for his or her safety including, but not limited to, fleeing 

the premises and calling police or fire department, in order to mitigate the possibilities of harm 

and/or damage.  

NAPCO is not an insurer of either the property or safety of the user's family or employees, and 

limits its liability for any loss or damage including incidental or consequential damages to 

NAPCO's original selling price of the product regardless of the cause of such loss or damage. 

Some states do not allow limitations on how long an implied warranty lasts or do not allow the 

exclusion or limitation of incidental or consequential damages, or differentiate in their treatment of 

limitations of liability for ordinary or gross negligence, so the above limitations or exclusions may 

not apply to you. This Warranty gives you specific legal rights and you may also have other rights 

which vary from state to state. 

 

Napco Security Technologies, 333 Bayview Avenue,  Amityville,  NY 11701 

THE FOLLOWING STATEMENT IS REQUIRED BY THE FCC

.

 

 

This equipment generates and uses radio-frequency energy and, if not installed and used properly, that 

is, in strict accordance with the manufacturer's instructions, may cause interference to radio and 

television reception.  It has been type tested and found to comply with the limits for a Class-B computing 

device in accordance with the specifications in Subpart J of Part 15 of FCC Rules, which are designed 

to provide reasonable protection against such interference in a residential installation. 

However, there is no guarantee that interference will not occur in a particular installation. If this 

equipment does cause interference to radio or television reception, which can be determined by turning 

the equipment off and on, the user is encouraged to try to correct the interference by one or more of the 

following measures: reorient the receiving antenna; relocate the computer with respect to the receiver; 

move the computer away from the receiver; plug the computer into a different outlet so that computer 

and receiver are on different branch circuits. 

If necessary, the user should consult the dealer or an experienced radio/television technician for 

additional suggestions. The user may find the following booklet prepared by the Federal 

Communications Commission helpful: “How to Identify and Resolve Radio-TV Interference Problems”. 

This booklet is available from the U.S. Government Printing Office, Washington, DC 20402; Stock No. 

004-000-00345-4. 

N A P C O   L I M I T E D   W A R R A N T Y  

Содержание iSecure IBR-TOUCH-WL

















































Отзывы: