9
Entry/Exit Zones in Area 1
(Appears for New Panel Only)
Press the
R
button and then directly enter the zone number of any zones
which are to be used as Entry/Exit zones. Valid entries are from 01 to 32.
Directly enter each zone number, including leading zeros.
Use number buttons
0
through
9
.
Press
U
to save and then repeat for any additional zone(s). Press NEXT (
P
)
button to proceed.
NOTE:
Chime will automatically be programmed for all E/E zones.
Interior Zones in Area 1
(Appears for New Panel Only)
Press the
R
button and then directly enter the zone number of any zones
which are to be used as Interior Zones. Valid entries are from 01 to 32.
Directly enter each zone number, including leading zeros. Use number
buttons
0
through
9
. Press
U
to save and then repeat for any
additional zone(s). Press NEXT (
P
) button to proceed.
NOTE:
All
Interior zones will also be automatically programmed as “Exit/Entry Follower”
zones.
Number of Keypads in Area 1
Press the
R
button and then directly enter the total number of Keypads
to be installed in Area 1. Valid entries are from 01 to 07. Directly enter the
number of keypads, including leading zeros. Use number buttons
0
through
9
. Press
U
to save . Press NEXT (
P
) button to proceed.
NOTE:
Area 2 keypads can only be assigned in Direct Address
Programming. See Keypad Options.
Central Station Receiver 1 Telephone Number
Press the
R
button and using the number buttons, directly enter telephone
number of up to 16 digits including prefix, if necessary, for receiver 1.
NOTE:
Central Station Receiver 2 and 3 Telephone Numbers can be entered
in Direct Address Programming. See CS Reporting Options.
Press
U
to save . Press NEXT (
P
) button to proceed.
Central Station Receiver 1 Account Number
Press the
R
button and then directly enter an account number of up to
four digits.
NOTE:
Central Station Receiver 2 and 3 Account Numbers can be entered in
Direct Address Programming. See CS Reporting Options.
Press
U
to save. Press NEXT (
P
)
button to proceed.
Central Station Receiver 1 Telephone Number
Central Station Account #
For Central Station Telephone and Account Numbers:
Use number buttons
1
through
9
for digits 1–9;
press
G0
for a zero and
G
1
through
G
5
for letters B–F, respectively.
NOTE:
Pre-Dial
Delay = “D”; Dial-Tone Detection = “E”. Pressing the
0
button will produce a blank space (•).
Programming the GEM-P816 & GEM-P1632 (v.9A and Earlier)
(Direct Entry)
CHIME
07
CHIME
H
(Direct Entry)
CHIME
08
CHIME
H
(Direct Entry)
CHIME
22
CHIME
0
(Direct Entry)
CHIME
24
CHIME
-
(Direct Entry)
(Direct Entry)
CHIME
25
CHIME
-
