NAPCO 2WAY-UNIVKF, Руководство по установке

Страница: 15 / 20

15
Universal Operation
Wiring for Arm Sense
In Universal Mode, the receiver requires an Armed output from
the control panel in order to pass the system status to the
KeyFob. It may be configured for either a positive sense or
negative sense.
Wiring to a control panel with
an Armed output which goes
negative
upon arming.
5
Wiring to a control panel with
an Armed output which goes
positive
upon arming.
5
STEP 3
- WIRING FOR ARM & ALARM SENSE
Wiring for Alarm Sense
In Universal Mode, the receiver requires an Alarm output from
the control panel in order to pass the correct status to the
KeyFob. Typical connection will be to the bell output of the
control panel. It will automatically display a siren icon for a
steady input and a fire icon for a pulsing or temporal fire output.
The Alarm Sense input may be configured for either a positive
or negative output.
Wiring to a control panel with
an Alarm output which goes
positive
upon alarm.
Wiring to a control panel with
an Alarm output which goes
negative
upon alarm.
6
+ Positive
Bell
Output
6
- Negative
Alarm
Output
Negative = less than 3 V DC
Positive = greater than 7 V DC
Negative = less than 3 V DC
Positive = greater than 7 V DC
Remove Jumper
from Config Pin A
A
Install Jumper on
Config Pin A
A
Remove Jumper
from Config Pin B
B
Install Jumper on
Config Pin B
B