![background image](http://html.mh-extra.com/html/carymart/0020221/0020221_manual_2565874001.webp)
SHENZHEN GUIYUAN INDUSTRY DEVELOPMENT CO.,LTD
Http://w ww.carymart.com E-Mail: [email protected]
RF Wireless Receiver (Model 0020221 S4X-AC220-ANT3)
Feature:
Application: It can be used in industry automation, agriculture automation and home automation, such as factory, house, farm, pasture, vehicle,
ship, offshore operation, aerial vehicle, field call, etc. It can remote control equipments on land, w ater and air, such as remote control lights, sirens,
locks, motors, fans, w inches, blinds, linear actuators, doors, w indow s, electric solenoid valves, security alarm, business signs and various
devices.
Wireless control, easy to install.
Waterproof: The receiver has w aterproof case and w aterproof connector, it can be installed outdoors.
Universal input: Support voltage of AC110V (100V~120V), w idely used in US, Canada... and voltage of AC220V (200V~240V), u sed in UK,
France...
AC Pow er Output: It can control AC equipment w ith voltage 110V / 120V / 220V / 240V AC.
Each channel can w ork at maximum current 10A, such as 120W/12V, 60W/6V, 90W/9V, 240W/24V, 1100W/110V, 2200W/220V.
With w
ired control terminal
s: You can connect sensors, limit sw itches, manual sw itches or external devices to control the receiver.
With the external antenna, it can have a further w orking range.
You can turn on/ off the receiver w ith transmitter (remote control) from any place w ithin a reliable distance.
Wireless RF signal can pass through w alls, floors, doors or w indow s.
With reverse pow er protection and over current protection.
Reliable control: The receiver only w orks w ith the transmitter w hich use same code.
One/several transmitters can control one/several receivers simultaneously.
You can use tw o or more units in the same place.
Working Range:
With a transmitter (such as CB-4) to form a complete set, the maximum w orking distance can reach 2000M in an open ground.
The maximum w orking distance is a theoretical data, it shall be operated in an open ground, no barriers, no any interference. But in the practice, it
w ill be hindered by trees, w alls or other constructions, and w ill be interfered by other w ireless signals. Therefore, the actual distance may not
reach this maximum w orking distance.
Receiver Parameters:
Model No.: S4X-AC220-ANT3
Pow er Supply (Operating Voltage): AC100~240V (110V/120V/220V/240V)
Output: AC100~240V (110V/120V/220V/240V)
Working Frequency: 315MHz / 433MHz
Channel: 4 CH
Control Modes: Toggle, Momentary, Latched, Mom Toggle
Static Current: ≤6mA
Maximum Working Current: 10A / each channel
PCB size: 140mm x 73mm x 18mm
Case size: 192mm x 100mm x 45mm
External Telescopic Antenna:
Length of external telescopic antenna: 108mm / 445mm (stretch)
With SMA connector.
If you stretches the external telescopic antenna, it can have a further w orking range.
Matching Transm itters:
The receiver can w ork w ith different transmitters, such as model C-4 (100M), CWB-4 (50M, w aterproof), CP-4 (500M), or CB-4 (1000M) etc.
Usage (with the transmitter CB-4):
The receiver can be used to control AC 110~240V equipments.
Wiring:
If you w ant to control the AC 110V/220V lamps, do as follow ing:
1) Connect the live w ire of AC pow er supply to terminal “L / +” of INPUT, and connect the neutral w ire of AC pow er supply to terminal “N / -” of
INPUT.
2) Connect one side of AC lamp to terminal "L / +" of OUTPUT, and connect another side of AC lamp to terminal "N / -" of OUTPUT.
Setting different control modes :
Setting different control modes (We have set the receiver as Toggle control mode before delivery. If you w ant to use other control modes, do as
follow ing):
1) Setting control mode Toggle: Only connect Jumper-2.
Control mode Toggle: Press -> On; Press again -> Off.
Press button A: Terminals OUT1 outputs DC pow er, the lamp 1 is on. Press button A again: Terminals OUT1 stops outputting, the lamp 1 is off.
……
Press button D: Terminals OUT4 outputs DC pow er, the lamp 4 is on. Press button D again: Terminals OUT4 stops outputting, the lamp 4 is off.
2) Setting control mode Momentary: Only connect Jumper-1.
Control mode Momentary: Press and hold -> On; Release -> Off.