• 3 •
2.6 This product contains a lithium ion battery. In case of fire, you may use
water, a foam extinguisher, Halon, CO
2
, ABC dry chemical, powdered graphite,
copper powder or soda (sodium carbonate) to extinguish the fire. Once the fire
is extinguished, douse the product with water, an aqueous-based extinguishing
agent, or other nonalcoholic liquids to cool the product and prevent the battery
from re-igniting. NEVER attempt to pick up or move a hot, smoking, or burning
product, as you may be injured.
3. SET UP INSTRUCTIONS
3.1 Remove any cord wraps and uncoil the charging cable.
4. FEATURES
1
2 3
4
5
6
1.
ON/OFF button
2.
Charging socket
3.
Charging status LED indicator
4.
15 SMD LEDs
5.
Sliding magnetic bracket
6.
USB/Micro USB charging cable
5. CHARGING
IMPORTANT! CHARGE THE WORK LIGHT IMMEDIATELY AFTER PURCHASE,
AFTER EACH USE, AND AT LEAST EVERY 6 MONTHS. Failure to do this will
reduce the battery’s capacity and may void the warranty.
5.1 Insert the micro USB end of the charging cable into the micro USB port on the
end of the work light.
5.2 Insert the USB end of the cable into the USB port on your charger.
5.3 Plug your charger into a live power source.
5.4 The red charging status LED will light, to indicate charging has begun.
5.5 When the battery is fully charged, the LED will change to green.
5.6 Unplug the unit from your charger.
5.7 Recharge the work light after use, and at least every 6 months.
