6
1. SAfEty INStRUCtIONS
1.1. Safety instructions concerning Installation (Connecting and Locating)
EC.U.1.G.
- Gas and power supply have to comply with all national, regional and local
requirements and regulations.
- The grill may only be connected and used in accordance with all applicable
requirements and regulations.
- Before connecting, check if the device is suitable for the gas to use and the electricity
present. Refer first to the specifications on the type plate on the device.
- Sealing of the gas hose, couplings and connections has to be tested professionally
for leaking.
Performing a leak test with an open flame is extremely dangerous, can result in
serious injury and is strictly forbidden!
EC.U.1.E.
- Power supply have to comply with all national, regional and local requirements and
regulations.
- The grill may only be connected and used in accordance with all applicable
requirements and regulations.
- Before connecting, check if the device is suitable for the electricity present. Refer first
to the specifications on the type plate on the device.
EC.U.1.G. and EC.U.1.E.
- The radiant heat is intensive, make sure that all flammable materials are removed
within a minimum radius of 1,5 meters from the device.
- Fire regulations must be scrupulously observed.
- Always take care of optimum fire prevention, the appropriate extinguishing materials
and of adequate knowledge of how to deal with fires.
- The device has to be placed level and on a solid base.
- The device may under no circumstances be placed in the vicinity of flammable
materials.
Therefore, the device also may not be placed on flammable support (such as for
example plastic or wood; use for example stainless steel).
