Nanoxia Deep Silence 5 Rev. B, Руководство пользователя

Страница: 9 / 18

EN
3.1 Mounting of hard disk drives
Install the 2.5 or 3.5 inch hard drives in the illustrated mounting frames. In order to extract the
frame, squeeze the protruding brackets and pull the slide out gently.
To install a hard drive into a bracket insert the disk so that the connectors point to the back and
attach the hard drive using the screws provided
For the fitting of 3.5 inch hard drives
please use the holes in Figure 3A
For the fitting of 2.5 inch hard drives
please use the holes in Figure 3B
To lock the drive, push the bracket with the
drive back installed back into the slot until the
bracket is re-engaged.
3.2 Conversion and removal of the HDD-cages
Your new case is equipped with three modular HDD-cages (2 x 3-bay, 1 x 5-bay). The cages can
be removed, swapped or repositioned.
Due to this unique variability, you can:
- Adjust the number of available HDD mounts
- Install extra-long graphic cards
- Optimize the air flow within the case
- Mount a water cooling system behind the front fans
To remove the upper HDD cage, first remove the left
side as seen from the front as well as the two thumb
screws that secure the cage. Then you can carefully
pull it out.
Figure 3A Figure 3B
08