Nanoxia Deep Silence 4, Руководство пользователя

Страница: 16 / 20

EN
10. Connecti ng the front connectors to the motherboard
10.1 USB 2.0
Diagram 10A shows the standard pin assignment of the USB cable plug. The pins are assigned
in a way to fi t on current motherboards as shown in diagram 10B .
Please refer to the motherboard and check that the internal USB port of your motherboard is
identi cal to the one shown in diagram 10A .
If the pin allocati on of the internal USB port is the one shown in diagram 10A it is then possible
to connect the cable.
If, however, the pin allocati on of the internal USB port and the one shown in diagram 10A
diff er, please consult a professional. Wrong connected cables might cause serious damage to
your hardware.
10.2 USB 3.0
Diagram 10C shows the typical pin assignment of the internal 19-Pin USB 3.0. The pins are
assigned in a way to fi t on current motherboards ( diagram 10D ). By referring to the mother-
board manual, please check that the internal 19-pin USB 3.0 port is identi cal to the one shown
in diagram 10C .
If the pin allocati on of the internal 19-Pin USB 3.0 plug and the one shown in diagram 10C are
the same, please connect the cable. If, however, the pin allocati on of the internal 19-Pin USB
3.0 plug and the one shown in diagram 10C diff er, please consult a professional. Wrong con-
nected cables might cause serious damage to your hardware.
If your motherboard does not have an internal USB 3.0 port, you can acquire an internal 19-pin
to external 2x USB 3.0 Type A adapter cable.
Diagram 10A
Diagram 10B
15