EN
If you want to remove the middle cage and use only the upper cage, please note that the
upper cage (A) is not fi rmly anchored to the case. It can be pulled out of the case without
eff ort, if the central cage (B) is not installed.
The bott om HDD cage for a single 2.5 / 3.5 inch HDD/SSD is not removable.
5. Removing the front panel
To remove the front panel, simply hold the
cut-out at the bott om of the front panel and
pull it towards you with a fi rm tug.
Please note that the cables from the I/O
panel are guided through the upper part of
the front into the chassis. Please be careful
when you remove the front.
6. Fan assembly
Two 120 mm fans are pre-installed in your Deep Silence 4. You can mount up to three fans in
total.
You can, of course, connect the additi onal fans to the fan controller (
see Chapter 7
).
The fan in the front is equipped with an easy to clean dust fi lter. We recommend that you
clean it on a regular basis.
6.1 Front Fans
To switch the fan in the front or to clean
the dust fi lters, fi rst remove the front panel
(
see chapter 5
). Next, open the “Easy Access
Panel” by pushing slightly on the left side of
the panel (
picture 6A
).
picture 6A
B
11
Содержание Deep Silence 4
Страница 1: ......
Страница 20: ...Copyright 2013 Nanoxia UG...
