Nanoxia Deep Silence 4, Руководство пользователя

Страница: 13 / 20

You can remove the fan by pushing away
the retaining lugs a little bit from the fan
and then pull the fan out ( picture 6B ).
The dust filter can easily be pulled out,
as you can see here ( picture 6C ).
Please note, that the filter element must be fully inserted to guarantee the proper operation
of the “Easy Access Panel”.
6.2 Fans in the top cover
If you want to install an additional fan at the top of the case, please remove the Nanoxia Vent-
Cover first by removing the screws on the outside of the case.
Next, hold the fans from the inside and secure them to the top by fastening the screws from
the outside.
A case fan installed at the top of the case should exhaust air out of the case (fan rear side
facing outwards).
7. The 2-channel fan controller
The Deep Silence 4 is equipped with a stepless 2-channel fan control for up to six case fans. You
can operate up to three fans per channel.
7.1 Connecting the fans to the fan control
The fan controller is powered by a 4-pin Molex connector that is connected directly to the
power supply.
The controller has two channels (A and B), with each channel able to control up to three 3-pin
fans, therefore a total of six fans can be controlled.
picture 6C
picture 6B
12