Nanoxia CoolForce 1, Руководство пользователя

Страница: 8 / 15

3.3 Upgrading your CoolForce 1 with additional HDD cages
The HDD-cage mounting rail at the bottom of CoolForce 1 allows you to retrofit the case with
our separately available HDD cages, in order to increase the disk capacity of the case, if
desired. Slide the HDD cage simply into the rail until it locks.
4. Removing the front panel and the Nanoxia Air-Cover
4.1 Removing the front panel
To remove the lower part of the front panel, simply hold the cutout at the bottom of the front
panel and pull it towards you with a firm tug. The I/O-panel will not be removed when you
remove the front.
4.2 Removing the Nanoxia Air-Cover
To remove the lid of the case, for example to install fans or radiators under the top of the case,
please first loosen the catch at the rear side of the cover. Pull it gently backward and upward
away.
If you wish to close the Air-Cover again, let it slide obliquely from above into the appropriate
mounting holes and lock it with the catch.
07