Nanoxia CoolForce 1, Руководство пользователя

Страница: 7 / 15

After that, put the HDD Sled back inside the case and fix it with the thumbscrew.
We recommend using our SATA combo-cable with the angled connector, which we developed
especially for this purpose, in order to guarantee a smooth fit of the side panels. One SATA
combo-cable is already included, you can purchase additional cables in stores.
3.2 Utilizing the 2.5 inch mounting trays
Your CoolForce 1 comes with two 2.5 inch mounting trays, which have been specifically desig
-
ned to hold SSD drives – one each at the bottom of the case and one behind the motherboard
tray.
In order to mount an SSD on the tray, first remove the thumbscrews that holds the tray in place
and then the 2.5 inch tray. Place the SSD on the front of the tray and fix it with the included 2.5
inch mounting screws.
In the next step, please put the mounting tray with the attached SSD back inside the case and
fix it with the thumbscrew.
SSD
We strongly recommend using our flat SATA combo-cable with the straight connector, which
we developed especially for this purpose, in order to guarantee a smooth fit of the side
panels. One SATA combo-cable is already included, you can purchase additional cables in
stores.
06