manualshive.com logo in svg

NanoVibronix PAINSHIELD MD, Руководство пользователя

Поделиться
Скачать
NanoVibronix PAINSHIELD MD Скачать руководство пользователя страница 14

14

6

6.3

6.4

6.5

THE DRIVER

The life of the driver is dependent on the 
battery use, refer to section 5.2. To clean the 
driver use 70/30 IPA or disinfectant medical 
wipes. Do not use solvents, such as acetone, 
as they may damage the product. 

Do not

 immerse any part of PainShield

®

 in 

water or any other liquid.

The driver is flame resistant according to 
UL-94HB. It does not contain flammable 
materials and will not accelerate a fire. The 
driver is not intended for use in the presence 
of flammable liquids.

Use the actuator with a new patch for each 
treatment session.

A faulty unit which is still under warranty, can 
be sent to NanoVibronix for replacement. 
Refer to Appendix D for conditions of 
warranty.

The driver does not contain recyclable material.

THE ACTUATOR

It is recommended to replace the actuator 

after 30 treatments.

New actuators can be ordered from 
NanoVibronix or your local distributor.

THE PATCH

Do not use the patch more than once, as this 
may affect performance.

Содержание PAINSHIELD MD





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды