Ⅰ
● ●
Ⅱ
● ●
Thank you for purchasing our product. This user manual is a reference
for using our radar product. Please read the following safeguards and
warnings carefully before using this series product and keep this user
manual well for future reference.
Electrical Safety
● All installation and operation should conform to local electrical
●
safety standard.
● The power supply shall conform to the Safety Extra Low Voltage (SELV)
●
standard, and DC 12 V power supply shall meet requirements of
●
IEC60950-1. Please note that power supply shall subject to the require
●
ment specified on radar label.
● Make sure the power electrical safety before operating the device.
● A readily
a
ccessible
d
issembling
disconnect d
evice
shall
b
e i
ncorporated
●
in the wiring of the building.
● Prevent the power cable from being trampled or pressed, especially the
●
plug, power socket and the device adaptor.
● We
a
ssume
no l
iability
or r
esponsibility
for all the fires
or electrical shock
●
caused by improper handling or installation.
Environment
● Hard ground is the best choice for detection area, such as cement
●
ground.
As
f
or the
g
round c
overed with
vegetation,
m
ake sure the h
eight
●
of vegetation is less than 20cm.
● Make sure the detection area is not blocked by any vegetation, trees,
●
buildings or vehicles etc.
● Make sure there is no electromagnetic interference around the installa-
●
tion area and in the radar detection area, such as air conditioner external
●
unit, high-tension transformer and so on.
● Please transport, use and store the device within the range of allowed
●
humidity and temperature.
● Do not place the device in a damp or dusty environment, extremely hot
●
or cold temperatures, or the locations with strong electromagnetic rad-
●
iation or lighting.
● Pack the device with standard factory packaging or the equivalent mate
●
rial during the shipment.
Safeguards
● Make sure the antenna surface of radar is clean without any dirt.
● Do not dismantle the device because there is no component that can be
●
fixed by users themselves. Otherwise, it might cause water leakage or bad
●
performance due to unprofessional dismantling.
● Use the dry soft cloth to clean the device. If the dust is difficult to be
●
removed, please wipe it away with a clean cloth wetted slightly by the
●
mild detergent, and then use dry cloth to clean the device. Do not use
●
volatile solvents like alcohol, benzene, thinner, or abrasive detergent ,
●
which will damage the surface coating or reduce the working perfor-
●
mance of the device.
Warnings
● Use the standard provided by manufacturer and make sure the device is installed
●
and fixed by professional engineers.
● Do not provide two or more components (differ from the which provided
●
by manufacturer)for the device, otherwise it might damage the device.
Disclaimer
● This manual is for reference only. Please refer to the specified product
●
user manual for more details.
● All the software and user manual will be regularly updated according to the
●
product upgrade without prior announcement on the official website.
● The company is not liable for any loss caused by the operation that does not comply
●
with the manual.
● If there is any uncertainty or controversy, please refer to our final explana-
●
tion.
Millimeter Wave Radar
Millimeter Wave Radar
