NANO NRC0020-0200 UL, Руководство по эксплуатации и техническому обслуживанию

Страница: 12 / 24

10
OPERATING AND MAINTENANCE MANUAL
Chapter 5
- Installation
NRC0020-0200 UL
The data in this manual are not binding and may be changed by the manufacturer without notice. Reproduction of this manual, even partial, is strictly prohibited.
5. Use connectors rated for the maximum required voltage at the maximum operating ambient temperature, according to the chosen
installation type (see the indications on the electrical diagram). Use exclusively copper cables marked UL in compliance with NEC
(NATIONAL ELECTRICAL CODE) and CEC (CANADIAN ELECTRICAL CODE).
6. The unit's power feeding cable must first be connected to the terminals/breaker (as shown in the electrical diagram) and must then be
routed out of the unit through the specific cable outlet hole in the rear panel, identified by means of a decal showing the power
supply voltage.