Screw 4x M2x10 screws and 4x M2x6 screws through
the foot bracket into the fin block.
Screw the screws down until they all lightly touch the
foot bracket, then lightly tighten all the screws.
As you lightly tighten the screws the flat sections on the
fin blocks will be pulled into alignment with the foot
bracket.
When all the screws are lightly tightened you can fully
tighten them all.
M2x10 this end
4X
4X
4X
4X
4X
M2x6 this end
4X
4X
4X
4X
4X
Nano Flux Twin Assembly instructions page 7 of 27
Copyright Kontax Engineering Ltd 2019
