Nanni T6.280 Скачать руководство пользователя страница 8

Страница: 8 / 92

S01

INTRODUCTION

ABOUT THIS MANUAL

This Manual contains important information, tips, sug-

gestions and warnings. We urge you to read it carefully

and familiarize yourself with the engine before

starting.

For your own safety and longer service life of the engine,

follow the instructions and warnings contained in this

manual and in all documentation provided with the boat.

Ignoring them could result in damage to the engine or

personal injury to you or others.

Please ensure that this Manual is always kept in the

boat. It should always be available to anyone else using

the engine, i.e. anyone renting, borrowing or buying the

engine from you.

CONTENT & UPDATES

All the informations and specifications in this Manual

are based on the technical data applicable at the time of

its publication. Changes and updates may be made by

Nanni without notice.

Illustrations are intended as a general guide, and may

vary from the equipment fitted in the engine in some de

tails. Some sections of the Manual do not apply to all

engines. If this is the case, a text indicates which en-

gines it applies to.

If there are any equipment details that are not shown or

described in this Operator’s Manual, or if you have any

questions about the operation of any equipment, your

authorized Nanni Dealer will be glad to inform you of

correct care and operating procedures.

Содержание T6.280





























































































Результаты поиска

Содержание T6.280

Отзывы:

Похожие инструкции для T6.280

Бренды по названию

Популярные бренды

Nanni T6.280, Руководство оператора

Результаты поиска

Содержание T6.280

Отзывы:

Похожие инструкции для T6.280

Бренды по названию

Популярные бренды