manualshive.com logo in svg

Nanni T6.280, Руководство оператора, Страница: 11 / 92

Поделиться
Скачать
Nanni T6.280 Скачать руководство пользователя страница 11

11

ENGINE-GENSET SAFETY ICONS 

S

ome stickers are fixed directly on the engine. They are 

intended to help you to quickly identify the location of 

certain  components  and  avoid  possible  hazards  when 

working on the engine.

 

Ensure that these stickers are always visible and replace 

them if torn or washed up. 

Refers to important informations 

and instructions to follow before 

handling the engine.

    Indicates possible electrical hazards. 

    Indicates hot parts entailing substantial

    risks of burns. 

    Indicates an area containing pressurised

    fluids. 

    Indicates hazardous rotating parts.

    Stipulates that no flames or sparks should

    be created in the vicinity. 

    Indicates where to check the coolant

    level. 

    Indicates where to check the engine oil

    level. 

      

    Indicates the coolant drain orifice. 

      

    Indicates the oil drain orifice.

 

S02

 

 SAFETY

Содержание T6.280





























































































Отзывы:

Нет отзывов