background image

18

S03

 

 FLUIDS

FUELS

 DANGER !

Fuels and some fluids on board ships are easily flamma-

ble. Handle fuels with care and respect all safety rules. 

Do not refuel the tank while the engine is running. Do 

not  smoke  during  the  filling  process  or  in  the  engine 

compartment. Ventilate the engine compartment be-

fore starting. Wear protective gloves and eye protective 

glasses. Avoid synthetic clothing which can melt when 

ignited. Always keep a fire extinguisher nearby.

DIESEL FUEL

Diesel approved by Nanni Industries on the engines of 

the firm are as follows :

• EN 590 (Europe), 
• 

ASTM D975 (U.S.A and territorial waters assimilated, 

particularly in the Caribbean and Pacific areas),

• BS 2869 Part 1 Class A1 (G.B),
• JIS KS2204 Fuel N°02 (Japan).

These regulations are in compliance with ISO 8217 DMX.

SULPHUR CONTENT

European Union

 : 

Low-sulphur  diesel  (<50  mg/kg  sulphur)  [EN590],  or 

sulphur-free (<50 mg/kg sulphur [DIN EN590], [ULSD].

Non-European Union : 

Sulphur contained in diesel fuel not in accordance with 

EN 590 regulation significantly reduces the performance 

of the engine lubricant. More frequent oil changes 

are  mandatory  and  also  induce  much  shorter  fuel 

filter  replacement  intervals.  Request  a  certificate  of 

specifications  from  the  fuel  distributor  and  forward  it 

to the nearest Nanni local representative for advice and 

action.

Fuels not intended for the operation of marine engines 

or with very high sulphur content can cause irreparable 

damage  to  the  engine  and  are  not  covered  by  any 

warranty from Nanni Industries.

WINTER DIESEL

Without specific mention, these distributed fuels satisfy 

the climates in which they are geographically available. 

Generally speaking, summer diesel fuel complying with 

EN 590 is usable down to a temperature of 0°C [32°F], 

and the winter formulated fuel, down to a temperature 

of  -20  °C  [-4°F]  (type  No.  01-D  in  U.S.A).  In  any  case, 

consult your local distributor to ensure compatibility of 

the fuel.

NOTE !

Additions of petroleum distillates, petrol, solvents, un-

approved additives to improve the fluidity of diesel fuel 

at very low temperatures can cause irreparable engine 

damage and will void all contractual warranties and re-

sponsibilities from Nanni Industries.  

WATER IN FUEL

Water  is  a  non-flammable  and  incompressible  liquid. 

For  this  reason,  its  presence  is  particularly  harmful 

to the operation of the engine and to the entire fuel 

injection system. Water easily enters the tank by simple 

condensation and especially when it is left or partially 

empty. Fill up the fuel tank before storage/winter storage. 

Check the water-diesel separator regularly and clean it 

as required. Anticipate the replacement of the fuel filter. 

If a large quantity of water is present in the tank, drain it 

and flush the entire fuel and injection system with clean 

diesel fuel. Water in the diesel fuel can cause irreparable 

damages  to  the  engine  and  are  not  covered  by  any 

warranty from Nanni Industries.

MICRO-ORGANISMS IN FUEL

The presence of water in the tank automatically leads 

micro-organisms  and  bacteria  to  grow  and  will  mix 

with  the  fuel.  These  micro-organisms  grow  rapidly 

with a favourable temperature. Depending on their size, 

they can pass through filters and penetrate in the fuel 

injection system and cause a total engine failure which 

is not covered by Nanni Industries warranty. In the event 

of fuel contamination, contact the nearest Nanni agent 

who may, if necessary, use an approved disinfectant.

Содержание T6.280





























































































Отзывы: