Nanni N5.160 CR2 Скачать руководство пользователя страница 80

Страница: 80 / 104

S08

MAINTENANCE

TO REPLACE THE BELT:

1.  Stop the engine and remove the key from the panel.
2.  Carefully remove beltguard cover from engine.
3.  Release tension on belt on tension arm and remove

poly-vee belt from pulleys.

4. Install the new belt. Check that the belt seats nicely

between the flanges of all the pulleys.

5. Apply tension to belt with tensioner.

CHECKING THE TENSIONER SPRING TENSION:

Belt drive systems equipped with automatic (spring)

belt tensioners cannot be adjusted or repaired. The

automatic belt tensioner is designed to maintain proper

belt tension over the life of the belt. If tensioner spring

tension is not within specification, replace tensioner

assembly.
The belt tensioner is designed to operate within the

limit of arm movement provided by the cast stops (

and

) when correct belt length and geometry is used.

Visually inspect cast stops (

and

) on belt tensioner

assembly. If the tensioner stop on swing arm (

) is

hitting the fixed stop (

), check mounting brackets

(alternator, belt tensioner, idler pulley, etc.) and the belt

length. Replace belt as needed.

CHECKING THE BELT TENSION WITH A SMARTPHONE:

Nowadays, it is possible to check a belt tension in using

an application on a smartphone. Several applications

may be tested and used. In the majority of cases,

results are very performing.
The principle consists of the comparison of the belt

vibration against an algorythm stored in the application.

Among the applications freely available, one may

consider one of these :
•

Tension 2Go APP (Continental)

•

PT Toolkit APP (Gates)

• Easy tension APP (Hutchinson)

Содержание N5.160 CR2









































































































Результаты поиска

Содержание N5.160 CR2

Отзывы:

Похожие инструкции для N5.160 CR2

Бренды по названию

Популярные бренды

Nanni N5.160 CR2, Руководство оператора

Результаты поиска

Содержание N5.160 CR2

Отзывы:

Похожие инструкции для N5.160 CR2

Бренды по названию

Популярные бренды