Nanni N4.65 Скачать руководство пользователя

Страница: 10 / 94

S02

SAFETY

SAFETY SIGNALS

A signal word—

DANGER

WARNING

, or

CAUTION

—is

used in conjunction with the safety-alert symbol.

DANGER

identifies the most serious hazard with lethal

possible consequences.

WARNING

identifies serious hazard with possible large

injury consequences.

CAUTION

identifies precautions to undertake which if

not followed could lead to the above mentioned safety

warnings. Damage to equipement could happen.

NOTICE

is used for specific attention to sensitive actions

on equipment. Other signals still applying.

IMPORTANT

is a signal with a meaning of care to apply

to equipment.

SAFETY INFORMATION

This symbol on the engine or in this manual is an alert to

the potential for personal injury. Follow recommended

precautions and safe operating practices.

REPLACEMENT OF MISSING OR DAMAGED

SAFETY SIGNS

Replace missing or damaged safety signs. There can

be additional safety information contained on parts

and components sourced from suppliers that is not

reproduced in this Operator Manual.

READ SAFETY INSTRUCTIONS

Carefully read all safety messages in this manual and on

your genset safety signs.

Keep safety signs in good condition. Be sure new

equipment components and repair parts include the

current safety signs.

Replacement safety signs are available from your dealer.

There can be additional safety information contained on

parts and components sourced from suppliers that is

not reproduced in this Operator Manual.

Keep your equipment in proper working condition.

DANGER !

WARNING !

CAUTION !

NOTE !

IMPORTANT !

Please keep in mind that above safety labels have no

degree of danger. Any irresponsible action could lead to

a real danger situation.

Learn how to operate the equipment and how to use

controls properly. Do not let anyone operate it without

instruction.

Unauthorized modifications to the equipment may

impair the function and/or safety and affect its life span.

If you do not understand any part

of this document and need

assistance, contact your Nanni

representative.

Содержание N4.65































































































Результаты поиска

Содержание N4.65

Отзывы:

Похожие инструкции для N4.65

Бренды по названию

Популярные бренды

Nanni N4.65, Руководство оператора

Результаты поиска

Содержание N4.65

Отзывы:

Похожие инструкции для N4.65

Бренды по названию

Популярные бренды