Nanni N16.900 CR3 Скачать руководство пользователя страница 37

Страница: 37 / 119

INTRODUCTION

This chapter is intended for professionals and seasoned technicians. Users of this equipment are assumed to be fluent

in handling marine systems, and must be able to carry out related electrical tasks. This chapter describes the features

of the unit, the use and specifications.

Including software embedded, the SI.3 is a 3.5” full-colour display with Linux operating system. The screen is a QVGA

high brightness display and hardware accelerated. With configurable backlit soft keys, operators can interact efficiently

with the engine. The SI.3 has multifunctional capability and is used as instrumentation display machine control. This

chapter provides important information regarding the proper use of the device.

S06

INSTRUMENTATION

PRODUCT IDENTIFICATION

Each unit bears two identification labels with serial

number, part number and revision which identifies the

unit. This information is required when technical sup-

port is needed.

FRONT SIDE

Panel buttons

Command buttons are located on the right side of the

unit. An Led is coming up when relevant button is ac-

tivated.

Start button

Navigation scroll button (HIDE)

Navigation scroll button

Stop button (MUTE)

PRESENTATION

The screen displays engine informations and allows the

Start and Stop of the SCANIA engines through two push

buttons (top and bottom).

A pulse on the

Start

push button (top) will send a start

message on the CAN bus, which, in turn will crank the

engine.

A pulse on

Stop

push button (bottom) will send a stop

message on the CAN bus, stopping the engine.

The screen will also display engine occuring error event

through the CAN bus network.

Above: front view of the SI.3 showing display screen

during booting sequence.

Содержание N16.900 CR3
























































































































Результаты поиска

Содержание N16.900 CR3

Отзывы:

Похожие инструкции для N16.900 CR3

Бренды по названию

Популярные бренды

Nanni N16.900 CR3, Руководство оператора

Результаты поиска

Содержание N16.900 CR3

Отзывы:

Похожие инструкции для N16.900 CR3

Бренды по названию

Популярные бренды