Nanni N16.900 CR3 Скачать руководство пользователя страница 61

Страница: 61 / 119

GENERALITIES

WARNING !

Perform maintenance operations having the engine

stopped and cold. Get the the starting key out from the

panel, put it in your pocket and turn off the power supply.

Read this whole chapter and take all safety precautions

before contemplating any maintenance or repair work.

Make sure you understand how to perform every

operation.

CAUTION !

Clean the engine before any maintenance. Watch for any

oil or fluid drop as it is an evidence of a leak somewhere.

CAUTION !

Do not let oil, fuel or grease deposits to build up around

the engine as they may increase the risk of fire in the

engine compartment.

Moreover, these deposits may hide potential heavy

unseen failures.

S08

MAINTENANCE

The maintenance scheddule covers a number of points

divided into several sections :

•  Lubrication system.
•  Air cleaner
•  Cooling system
•  Fuel system
•  Various

WARNING !

Prior to any work onto the engine, the starting motor

command must be disabled first. Alternatively, a related

electric cable may be removed. Should the engine starts

unexpectedly, there is a serious risk of injury.
There is always a risk of sustaining burns when an

engine is hot. Particularly hot parts are engine manifolds,

turbochargers, oil sumps, as well as hot coolant and oil

in pipes and hoses.

IMPORTANT !

Upon delivery, the engine is optimised for the proposed

application.

However, regular maintenance is necessary to :

•  Prevent unplanned stops
•  Extend the service life of the engine
•  Maximise the long-term emission performance of the

engine

• Provide the best possible operating economy.

Содержание N16.900 CR3
























































































































Результаты поиска

Содержание N16.900 CR3

Отзывы:

Похожие инструкции для N16.900 CR3

Бренды по названию

Популярные бренды

Nanni N16.900 CR3, Руководство оператора

Результаты поиска

Содержание N16.900 CR3

Отзывы:

Похожие инструкции для N16.900 CR3

Бренды по названию

Популярные бренды