NANLUX TK-140B Скачать руководство пользователя страница 42 | Manualshive

Страница: 42 / 44

background image

40

Safety Precautions

1. Please open the package to check for damage caused in transit, if damaged please do not use and contact place of purchase or manufacturer as soon as possible.
2. Do not use a power cable with damaged insulation. Do not unplug hard or drag the power cable directly.
3. Ensure the power supply’s voltage matches the voltage specified by the fixture before installation.
4. When cleaning or not using the light, please turn it off.
5. Stored the light safely and away from children.

Notice

1. Do not place any object on the light emitter.
2. Don't place objects on the light or allow liquid to follow inside the fixture or the emitter.
3. Don't place the light near flammable substances like alcohol or gasoline.
4. When cleaning the light, please wipe off debris or dirt by using a dry cloth with clean water or neutral cleanser
5. The light should be operated safely where it won't be at risk of getting wet or under extreme temperature.
6. Don't repair the light by yourself. Attempts to self repair will void warranty, for repairs please return to place of purchase.
7. When using the fixture for a long time, the temperature of the fixture is high, please pay attention to anti-scalding.

General Fault Detection and Diagnosis

If the failure is not resolved after troubleshooting, please contect place of purchase.

The light won't boot up properly!

Diagnosis

Fault Detection

LCD display is on, but

can't operate the light.

The fixture can operate by manual,

but DMX control is not working.

1. Please check the LED indicator. If flashing or not on at all, please check whether the connection between power

adapter, power cable and outlet connection is preperly connected or loose.

2. Please check wether the voltage value is within the specified paremeters.

3. If using battery, please check if the battery is installed properly, if the voltage of battery is consistence with the

specified voltage.

1. Please check whether the DMX original adress setting of the fixture is correct or not.

2. Check that the XLR signal cable is connected correctly or is damaged.

Please check if the LCD display shows " ", long press the "LOCK" key for 2 seconds to release the LOCK.

«
...
40
41
42
43
44
»

Содержание TK-140B













































Отзывы:

Нет отзывов

Похожие инструкции для TK-140B

Бренд: Odom Страницы: 19

Бренд: MacDon Страницы: 30

Giraffe OmniBed

Бренд: Ohmeda Страницы: 54

Movie FL Black E27 Flaps

Бренд: Qazqa Страницы: 2

Бренд: Rainbow Страницы: 18

Бренд: Campbell Страницы: 2

Бренд: M-system Страницы: 2

Бренд: Rico Страницы: 34

NI VISION PCI-8254R

Бренд: National Instruments Страницы: 13

NI VISION PCI-8254R

Бренд: National Instruments Страницы: 16

Бренд: National Instruments Страницы: 10

Бренд: National Instruments Страницы: 39

Бренд: National Instruments Страницы: 65

Бренд: haacon Страницы: 59

Бренд: Tanaka Страницы: 20

Бренд: Tandem Страницы: 80

Бренд: Tanco Страницы: 4

Бренд: Garmat Страницы: 13

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды