N&W Global Vending Snakky RY, Руководство по установке

Страница: 33 / 52

© by N&W GLOBAL VENDING S.p.A.
29
06 2007 294-00
chaNgiNg thE NumbER of tRayS
The vending machines are supplied with 7 trays.
It is however possible to bring the number of trays to 5 or
6, proceeding as follows:
- Disconnect the plug from the power supply.
- Remove all trays from the machine.
- Move the guides (see fig. 25) placed on the side sup
-
ports, except the first ones at the bottom which stay in
the same position.
- Remove the pair of guides not used.
- Replace the 5 or 6 trays, ensuring that the connectors
are inserted properly.
- Secure the removed cables, as not to be in the way of
other trays and cables.
- Reprogram the machine.
Fig. 24
1 - Tray connector
2 - Tray guides
chaNgiNg thE tRay coNfiguRatioN
The configuration of the spirals on each tray can be
changed. To go from two selections with single spirals to
one selection with double spirals, do as follows:
Remove the tray to be modified.
-
Remove the centre wall, pushing it towards the back
-
and then lifting.
Remove the spirals, and the flanges, from the two mo -
-
tors.
disconnect the left-hand side motor from the cable and
-
remove it from the tray. In its place, fit the bush and pin
bush.
Install the right-hand and left-hand spirals with the
-
same pitch onto the new flanges (right and left are
identical), fitted with a cogged wheel, and then connect
the right-hand one to the motor still on the tray and the
left-hand one onto the previously installed bushes. The
two cogged wheels must mesh.
Remove the price labels and the product compart
-
-
ments no longer used, and if necessary update the
price labels still in use.
Program the new selections with the desired price.
-
test the modified selections, to be sure of their correct
-
operation.
n.B.: The selection numbers are composed of two
figures; the first one refers to the tray number, counting
from the top (1-6), the second figure refers to the spiral
number, counting from the left (0-5).
The selection number to which the motor is connected
will therefore be formed by the tray number plus the wire
code number.
Fig. 25
Tray 1-
Movable partitions 2-
Right-hand spiral 3-
Left-hand spiral 4-