N&W Global Vending Snakky RY, Руководство по установке

Страница: 19 / 52

© by N&W GLOBAL VENDING S.p.A.
15
06 2007 294-00
StatiSticS
Data on the machine operations is stored in both gen -
eral counters and relative counters, which can be reset
without losing total data.
p
riNtiNg
Connect an RS232 serial printer having a Baud rate of
9600, 8 data bit, no parity, 1 stop bit to the serial port
located on the push button board to print all of the statis -
tics.
total
1 - counter by single selection;
2 - counter by time bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors;
7 - dispensing compartment lock errors.
Relative
1 - counter by single selection;
2 - counter by time bands;
3 - failure counter;
4 - coin mechanism data;
5 - photocell errors;
6 - motor errors;
7 - dispensing compartment lock errors.
The hardcopy printout will also contain the machine
information, and namely:
date/time of print
-
machine name
-
software version
-
operator code
-
machine code
-
installation date.
-
For printing operate as follows:
From the print function press the confirm button
-
�
,
displaying the message “Confirm?”
Connect the printer before confirming.
-
Press the confirm button
-
�
to start printing.
D
isplayiNg
Press the confirm button
�
to display in a sequence the
data obtained with the statistic printing, for both total and
relative counters.
D
eletiNg
Statistics can be reset for relative counters globally (all
types of data) or selectively for:
selections
-
Failures
-
coin mechanism data
-
Photocell errors
-
motor errors
-
Dispensing compartment lock errors
-
Press the confirm button
�
, displaying the blinking mes -
sage “Confirm?”.
Press the confirm button
�
again, the message “Work -
ing” is displayed for a few seconds and all statistics are
reset.
SElEctioN pRicES
This function is used to change the sales price for each
selection according to any time band set.
Button
�
is used to access directly the price/selection
combination of time band 0, if the function is enabled in
the “Programming” menu.
chaNgE tubES coNtRol
By accessing the “Tube control” function the change
tubes can be filled or released manually.
Confirming the refilling, the display will indicate
“Credit: ——” which is the value of money available in
change the tubes; insert the desired coin into the selec -
tor and the display will indicate the value of money avail -
able in the change tubes.
When confirming the releasing, it will be possible to de -
cide which tube to release. Each time the confirm button
�
is pressed, a coin is ejected from the active tube.
FILL>
STATISTICS
FILL>
Azzeramento statistiche
�
�
FILL>
SET IND PRICES
�
�
SET IND PRICES
Price of band #
Price of band #
Selection #
Selection #
Price # #. # #
� �
� �
FILL>
STATISTICS
FILL>
Print statistics
�
�
FILL>
STATISTICS
FILL>
Display statistics
�
�
FILL>
Tubes control
Fill tubes
Credit:#####
� �
Release tubes
Credit:#####
Release tubes
Tube A ÷ X
�
�