ZETA Quick Reference Guide
Open the door of the machine in order to access the control board which has a set of
minidip switches which are numbered from 1 – 6 as follows:
ON
1
2
3
4
5
6
1 = Programming Mode
2 = Read Stored Data
3 = Not Used
4 = Total Sales Data
5 = Free Vend
6 = Motor Reset
Set Prices
•
To set prices turn Minidip switch to the ON position and the display will show “PRO”
•
Press button
1
the display (CR 1),
•
Press button
2
four times this will display the price of selection One. You can use buttons
3
&
4
to
Scroll to the price required.
•
Press button
2
to confirm change and move to selection
2
, (press button 2 to skip to the required
selection).
Statistics
•
To read statistics turn Minidip switch 4 to the ON position, this will give a total reading of all sales.
Motor Reset.
•
To reset motors when the motor cams are out of position move Minidip switch 6 to the
on
position
and close the door, this will reset the motors to the home
.
REMEMBER TO TURN ALL MINIDIP SWITCHES OFF BEFORE LEAVING THE MACHINE.
The selection buttons on the front door of the Zeta are used to as follows:
4
DECREASE VALUE
3
INCREASE VALUE
ENTER AND/OR SKIP TO NEXT STEP
2
1
ENTER/EXIT PROGRAMMING MODE
