ZENITH Quick Reference Guide
•
Open door and insert service key
•
The programming button is located inside the main door on the coinage
compartment
Prices
•
Press the program button once then the exit button (Present Failures).
•
Press the scroll button (Program Parameters).
•
Press enter (Cash).
•
Press enter (Prices)
•
Press enter (Set individual price).
•
Press enter (band 0).
•
Press enter (Selection Flashing).
•
Use the scroll buttons to select the correct price and press enter to confirm change.
-------------------------------------------------------------------------------------------------------------------------------
Statistics
•
Press the program button once (Statistics).
•
Press enter button and scroll to (Statistics display).
•
Press enter (Selection Count Display).
•
Press enter and scroll to (Total Count Display)
•
Press enter, you can know scroll through the selections for individual counts or a grand total.
----------------------------------------------------------------------------------------------------------------------------------------
Reset Failures
•
Press the program button once then the exit button (Failures).
•
Press enter choose between Read Failures and Reset Failures.
•
Press enter Read Failures or scroll to Reset Failures and press enter to delete any failures.
Prime Syrups
•
Press the Program button once then the Exit button (Present Failures).
•
Scroll to Test and press enter (Complete Selection) and scroll to (Unit Control)
•
Press enter (Press button Flashing).
•
To prime Syrup 1 press the 5
th
button down on the left hand column and press enter.
•
To prime Syrup 2 press the 5
th
button down on the center column and press enter.
SCROLLING KEYS
to move to the previous or next menu.
Enter
KEY
to move from one menu to a sub menu or confirm the data on the display.
EXIT KEY
to return from a sub menu to the higher level menu or to clear the data on
display.
To exit the program press the program button again
