STARFOOD Quick Reference Guide
•
Open coinage door, program switch is located at the rear of this section next to the
processor board.
4
3
1
2
Use buttons 1&2 to move up and down the menu:
Price Setting
•
Press the Program button (bottom Switch) twice, (Present Faults)
•
Press button 2 (program parameters)
•
Press button 3 (Prices)
•
Press button 3. (Set an Individual Price).
•
Press button 3 (Select drum).
•
Select the disk to be priced and press button 3.
•
Price will know flash and you can use buttons 1&2 to alter the price and press button 3 to
confirm the change.
-------------------------------------------------------------------------------------------------------------------------------
Statistics
•
Press the program button (bottom switch)(Statistics).
•
Press button 3 (Statistics Printing) button 2 twice (Statistics Display),
•
Press button 3 (Selection Count Display).
•
Press button 3 (Total Count Display).
•
Total Count Display on the screen
press
button
3.
-------------------------------------------------------------------------------------------------------------------------------
Reset Failures
•
Press the program button (bottom switch) twice (Failures).
•
Press button 3 and press button 2 (Reset Failures) then press button 3.
To exit the program press the program button
