Nana Wall Systems, Inc.
100 Meadowcreek Drive #250
Corte Madera, CA 94925
800 873 5673
415 383 3148
Fax 415 383 0312
[email protected]
nanawall.com
©2023 Nana Wall Systems, Inc.
PAGE 4 OF 4
• Variations in wood grain or color; Warp within the allowable warp tolerance for wood panels per ANSI/WDMA I.S.
6-A-01; Warp that does not affect the normal functioning of the Product; Warpage on wood panels caused by leaving
panels in the open position exposed to the elements or not engaging the locking points properly when in the closed
position; Resin or sap bleeding from wood panels.
• Panel shrinkage or expansion caused by change in weather; Expansion or bowing of aluminum units caused by
exposure to sunlight or caused by temperature difference between interior and exterior panel surfaces.
• Acts of God, falling objects, fire, accidents, external forces, extreme weather events, or other conditions beyond
NanaWall’s control.
• Gas fill or retention levels in insulated glass units.
• Field testing of Product; Performance of the Product in conformance to any published NanaWall testing results
(e.g. air infiltration, water infiltration, structural loading, thermal and sound). Published test results measure the
laboratory performance of a single sample of the product of a certain size, sill and configuration that may not
be applicable to the Product being field tested. Performance during testing may vary depending upon handling,
installation, use, maintenance, and time after installation. Field testing must be in compliance with AAMA 502,
including water penetration testing at 2/3 of the pressure of applicable published test results.
• Products or components not supplied by NanaWall; Products that have not been paid for in full; Products ordered in
larger sizes or special configurations beyond NanaWall’s published specifications. Product with glass that is heavier
than NanaWall specifications; Product that has been modified or altered in any manner.
NANAWALL LIMITED WARRANTY
