DISCLAIMERS & LIMITATIONS
Any responsibility of NanaWall is contingent upon owner fulfilling its notice obligations as stated in this Warranty. The
owner shall have no standing to assert a claim absent timely notice to NanaWall and an opportunity to cure. The remedies
prescribed in this Warranty are the exclusive and sole remedies available to the owner who hereby waives any claim not
encompassed herein. This exclusivity and waiver survive expiration of warranty coverages herein. In no event shall the
liability of NanaWall or any seller of NanaWall product exceed the price paid for the product.
This Warranty is the sole and exclusive warranty for NanaWall products.
ALL OTHER WARRANTIES, EXPRESS OR
IMPLIED, INCLUDING ANY WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, ARE
DISCLAIMED. NANAWALL SHALL NOT BE LIABLE FOR CONSEQUENTIAL OR INCIDENTAL DAMAGES.
Some state
and federal laws may not allow disclaimers of implied warranties or exclusions of incidental or consequential damages,
so these limitations or exclusions may not apply to you. Where federal law prohibits disclaimer of implied warranties,
the duration of any implied warranty is limited to the duration of the relevant coverage period, if less than the statutory
limitation period. This Warranty gives you specific legal rights, and you may also have other rights which vary from state
to state.
This Warranty may only be modified by a writing signed by an officer of NanaWall. Any action taken by NanaWall does not
create a new warranty or extend the duration of the original product warranty. A failure by NanaWall to enforce a warranty
provision shall not constitute a waiver barring subsequent enforcement.
EXCLUDED CONDITIONS.
This Warranty does not cover the following conditions, or any damage or issues caused in whole or part by the
following:
• Improper product selection, application, storage, handling, modification, or waterproofing; Movement of surrounding
substrates, including deflection of the header of more than ¼”, or any other stresses on product; Improper installation,
flashing, or integration into the structure; Failure to provide an adequate overhang; Failure to prevent the effects of
sheeting rain or water; Failure to install proper weep holes in sill where needed, and failure to properly drain water
exiting weep holes in the sill; Failure to meet code or specification requirements.
• Finishing by anyone other than NanaWall, including, but not limited to, not properly finishing all sides of wood
products promptly after receipt of unit, before installation, and before exposure to weather, finishing exterior wood in
dark colors, or not refinishing periodically; Discoloration of finish; Failure to immediately repair any breaches such as
scratches, chips, or abrasions in any finish or aluminum profile.
• Condensation, frost, or mold caused by high interior relative humidity; Installation near swimming pools, saunas, hot
tubs or other high humidity environments or sources of chlorine; Harsh chemicals such as road salt, solvents, acid,
brick or mortar wash, or cleaning chemicals; Corrosion, oxidation, discoloration or tarnish on product installed in Harsh
Environments.
• Normal weathering, wear and tear; Failure to follow the NanaWall operation and maintenance instructions; Failure to
operate the product for more than one month; Failure to clean and maintain aluminum surfaces in accordance with
AAMA 609 and 610 or not maintaining adequate cleaning records.
• Imperfections in glass that do not affect the product’s structural integrity or obscure vision and cannot be detected
from within 10 feet as per ASTM C 1036; Accidental or spontaneous glass breakage; Glass breakage due to thermal or
other stresses, or glass with film or other coatings applied to the surface; Industry accepted bow, warp or distortion in
glass and minor variations in glass color; Glass not installed as per NanaWall’s instructions.
NANAWALL LIMITED WARRANTY
PAGE 3 OF 4
