NAMCO Tekken Tag Tournament, Руководство по эксплуатации

Страница: 18 / 59

4 Connect the wires of the extended edge harness on the following table to the terminals of PI
button switch and P2 button switch on the control panel by soldering or fixing an
applicable crimp-style terminal.
Soldered side
P2 button switch 4 (white/blue)
Terminal side
Parts mounted side
A 8
P2 button switch 5 (white/purple)
GND (black)
switch 4 (blue)
B 1 3
GND (black)
button switch 5
b u t t o n switch
\
Extended
s w i t c h
edge harness
& W A R N I N G :
Always use the extended edge harness specified by Namco Ltd. Otherwise it may cause a fire or
electrical shock. Contact your distributor to order parts. Refer to “11. REPLACEMENTPARTS
LIST,’ on
for details of the replacement parts.
Apply insulating heat contraction tube on the connecting part to prevent
circuit.
In case the button switch is three-terminal, the input terminal (wires with the
terminal number of the extended edge harness should
be connected to the N.O. terminal of the button switch. of the extended
edge harness (wires with the terminal number should be connected to
the COM terminal of the button switch.
In case the button switch is two-terminal, these can be connected to either
terminal.
5 Install the control panel on the cabinet.