NAMCO Tekken Tag Tournament, Руководство по эксплуатации

Страница: 35 / 59

2 Hit the S-direction joystick to up or down to select the adjusting item out or
“Contrast”, “Bright “Bright and “Bright
switch I
S-direction
switch 4
Note: The above figure shows pair control panel. In
case of the single control panel (that is, two cabinets
corresponding to
VIDEO standard
are linked for networked play),
the control panel of the cabinet on which the PC
board is installed shall be called
Pi.
3 Hit the S-direction joystick to right or left to change the setting.
The details of-the adjustment is shown in the table below. The result of the adjustment
shall he checked on the color bar on the screen.
Item
Description I
C o n t r a s t Adjusting contrast of the picture I
B r i g h t R Adjusting shade and tone of red color of the picture signal
Bright G Adjusting shade and tone of green color of the picture signal
Bright B Adjusting sbade and tone of blue color of picture signal
* After changing the setting,
To initialize the settings,
Press the button switch 5. changed settings are erased. .
l
To stop adjusting,
press the button switch 4. The ‘Color Edit” screen disappears and adjustment is
suspended.
l
To re-adjust,
press the button switch 4 again. The “Color Edit” screen appears again for re-adjustment
4 Press the start switch to return to the test menu screen after completing the whole
“DISPLAY TEST’.
Press the button switch 1 to display the adjusting screen for the other adjustment in the
“DISPLAY TEST’.
5 Perform “6-l-3 Finishing the Test Mode” to exit the test mode.