NAMCO PAC-MAN BATTLE ROYALE Скачать руководство пользователя страница 5

Страница: 5 / 74

1. SAFETY PRECAUTIONS

Test mode

Troubleshooting

Critical safety precautions/ Description of warning labels atta

ched to the machine

1-4 Description of warning labels attached to the machine

WARNING

The warning labels describe important safety precautions. Be sure to observe the

following:

To ensure that the warning labels attached to the machine are easily legible, install

•

the machine at an appropriate location with ample illumination and keep the labels

clean at all times. Also, make sure that the labels are not hidden behind another

game machine or other objects.

Do not remove or alter the warning labels.

•

If the warning labels become excessively dirty or damaged, replace them with new

•

labels. To order warning labels, contact your distributor.

Warning labels

To Purchase This Item, Visit BMI Gaming | www.bmigaming.com | (800) 746-2255 | +1.561.391.7200

Содержание PAC-MAN BATTLE ROYALE











































































Результаты поиска

Содержание PAC-MAN BATTLE ROYALE

Отзывы:

Бренды по названию

Популярные бренды

NAMCO PAC-MAN BATTLE ROYALE, Руководство по эксплуатации

Результаты поиска

Содержание PAC-MAN BATTLE ROYALE

Отзывы:

Бренды по названию

Популярные бренды