NAMCO CRISIS ZONE DX, Руководство оператора

Страница: 52 / 89

Page 51
5-2-3 I/O Test
1. Select “I/O TEST” on the menu screen to switches and lamps. The following
screen is displayed.
2. Use the Select Up/Down switch to choose the required item then press the
Enter button to enter the test.
3. Select “EXIT” and press the Enter button to return to the menu screen.
(a) Shows the condition of the DIP Switches on the PCB. In normal operation all
switches are OFF. (If a switch is ON, it will be displayed in red.)
(b) Checks function of I/O PCB. (see Section 5-2-3-1 page 52)
(c) Used to test and initialize the gun operation (see Section 5-2-3-2 page 52)
(d) Selecting this item allows all switches and pedal sensor to be checked.
(See 5-2-3-3 page 56)
(e) Selecting this item allows the testing of the gun recoil motor.
(See 5-2-3-4 page 57)
I/O TEST
DIP 3 12345678 [ON:RED] .............................................. (a)
I/O PCB CHECK ............................................ (b)
GUN INITIALIZE ............................................ (c)
SWITCH TEST ............................................ (d)
MOTOR TEST ............................................ (e)
EXIT
SELECT SW : CHOOSE ENTER SW : ENTER