Page
1-1 Installing the Sign Assembly
For your convenience, the sign assembly has already been fitted to the tower unit.
NOTE: The weight of the Sign Assembly (not including the sign board) is 32kg. The
centre of gravity of the Sign Assembly is to the front , making it unstable, and
as assembly involves lifting the Sign Assembly above head height, at least
two people should be used to install the Sign Assembly.
1)
Remove the two security screws (M5x12), and remove the harness cover.
2)
Make sure that there are no wires or connectors on top of the main tower assy. If
there is, drop them in to the tower.
3)
NOTE: The Sign Assembly is unstable. Ensure that one person maintains the
balance of the sign assembly during installation.
4)
Place the Sign Assembly on top of the tower, making sure that the Sign
Assembly is forward of the tab at the top rear of the tower. Centre the Sign
Assembly left to right and push the assembly back until the base board engages
in to the tab.
5)
Using the four hex head bolts (M10x30) and washers supplied, secure the Sign
Assembly to the main tower assembly.
6)
Feed the harness through from the tower assembly and connect the connectors.
Refit the harness cover using the two security screws (M5x12) removed in step 1.
2
