Page
2-3-5
Motor Test
The following screen is displayed when “MOTOR” is selected on the I/O screen.
I/O TEST
DIP
2
12345678
3
12345678
LINK ON
2
COUNT O
SWITCH
MOTOR
BASE MOTOR
OFF
............... (a) Seat motor test
STEERING
OFF
TORQUE
00
............... (b) Steering motor test
EXIT
GAS: TURN
SHIFT: CHOOSE
(a)
Tests the seat roller motor.
When “BASE MOTOR” is selected and the accelerator is pressed the test is “ON”
and the motor starts to operate. Pressing the accelerator again turns the test
“OFF” and the motor stops.
(b)
Tests the steering feedback motor.
When “STEERING” is selected and the accelerator is pressed the test is “ON”
and the motor will start and turn the steering wheel left and right.
When performing this test, ensure that test (a) “BASE MOTOR” is also “ON”.
Pressing the accelerator turns the test “OFF” and the motor will stop.
Select “EXIT” to return to the I/O test screen.
Note:
Performing the steering motor test can be dangerous, sit on the
seat properly, and take hands off the steering wheel.
19
2-3-6
Motion Stop Test
The Stop Motion Switches will illuminate as soon as the test switch is turned
ON.
To test the motion stop switches enter motor test (
Refer to section 2-3-5,
“Motor Test”.) and select Base Motor ON.
Each time a stop motion switch is pressed, the motor will stop and restart
when the switch is released.
NOTE: If the switch is pressed during game play, the seat motion will stop and
remain off for the duration of that game.
