Page
1-7 Linking Two or More Machines.
Up to four machines (8 seats) can be linked together.
The machines should be linked as described below.
NOTE: Each machine can draw up to 8 amps. Make sure that the power supply
is adequate.
1)
Ensure that
the power is
“OFF”.
2)
Loosen the
two screws
(M4x10) on
the back of
the tower
assy, and
remove the
connector
cover.
3)
Set the link switches to “ON” , “EXT”,
and “ON”. (See Diag.)
4)
Use the supplied link cable and
connect the machines between “IN”
and “OUT” sockets (See Diag.)
[Examples of Linked Machines]
a)
2 Machines
(4 Seats)
b)
3 Machines
(6 Seats)
c)
4 Machines
(8 Seats)
5)
Turn the power to each machine “ON”, and set the PCB ID using the test mode.
(Refer to
“Setting the Game Options”)
.
Note:
Settings other than those described will cause the machine to operate
incorrectly.
10
