AL3A-RM User Guide Version B
Document Number: 451-93156-002B
121 of 172
<number>: The phone number to dial. The number must be enclosed in double quotes
and cannot be more than 20 characters long.
B.122
^ADR
–
A
UTO
D
IAL
R
ETRY
Exec Command: ^ADR=<delay>
This command sets the time to delay in between dial attempts in auto dial mode.
<delay>: The number of seconds to delay. The value must be between 5 and 255
seconds.
B.123
^CCOP
–
C
HANGE
C
RYPTO
O
FFICER
P
ASSWORD
(E
NCRYPTION
)
Exec Command: ^CCOP=<old>,<new>
Change the Crypto Officer’s password from factory-set/old value to new value. The
password must include all printable keyboard characters. The password will not be
reset by AT command &F. When the A3LA-RM is set to echo, all entries are replaced
with asterisks (*) instead of the actual typed value. All passwords must be between 8
and 16 characters in length. The factory-set password is ‘temp password’ and must be
changed before encryption can be used.
<old>: Old password and must be enclosed by two single quotes (‘old password‘)
<new>:
New password and must be enclosed by two single quotes (‘new
password‘)
B.124
^CMGEC
–
C
LEAR
SMS
E
NCRYPTED
S
TORAGE
This command is a synonym for ^SMSE for backward compatibility. See the ^SMSE
command for details.
