AL3A-RM User Guide Version B
Document Number: 451-93156-002B
114 of 172
This command is based on GSM 07.07 [2] subclause 7.4, and is used to enable, disable
or interrogate an ME or a network facility <fac>.
Command is abortable in the cases when network facilities are set or interrogated.
The interaction of this command with other commands based on other GSM
supplementary services is described in the GSM standard.
Execute command is used to activate or deactivate Call Barring Supplementary
Services, SIM Fixed Dialling feature, the SIM card PIN Code, or to enable or disable the
Phone Lock feature in the A3LA-RM. A password code (detailed below) may be
required, depending on the action chosen.
Not all Call Barring services detailed in GSM 07.07 [2] subclause 7.4 are supported. A
subset of those implemented in the H1 menu MMI is supported.
Note:
This command will not work unless the SIM PIN has been entered using the
+CPIN command.
Note:
Once this command has been issued to disable the PIN, neither it nor the +CPIN
need to be issued again unless the PIN function is reactivated.
The following parameter values are currently supported:
<fac>:
“CS” CNTRL Surface (Enable/Disable Phone Lock feature). The current Phone
Unlock Code is required as <passwd>.
“SC” SIM: Activate/Deactivate SIM card PIN Code, in which the SIM asks
password in ME power-up. The PIN code is required as <passwd>.
"FD" SIM fixed dialling memory feature (PIN2 is required as <passwd>)
"AO" BAOC (Bar All Outgoing Calls) (refer GSM 02.88 [4] clause 1). The Call
Barring password is required as <passwd>.
"AI" BAIC (Bar All Incoming Calls) (refer GSM 02.88 [4] clause 2). The Call Barring
password is required as <passwd>.
+CLCK=?
+CLCK:(“CS”,”SC”,”FD”,”AO”,”AI”,”AB”)
