3.Lift the front of the bike and lower the fork onto the wheel.
Notice:
The
axle should enter the fork dropouts fully.
4.Line up the axle lock washers (These are the metal washer with a bent
tab on one side) with the hole at each fork.
Notice:
These two special
fork lock washers keep the wheel from falling off if the axle nuts ever
loosen up! Tighten the axle nuts by hand.
5.Once the lock washers are in place tighten both axle nuts with the
supplied double open-end wrench.
Notice:
Before doing the final tight-
ening of the axle nuts make sure the wheel is square and true with the
forks.
Содержание Pony
Страница 1: ...Pony...
Страница 2: ...Fully Assembled Pony White and Pony Red Pony White Pony Red...
