Nakayama PRO EC3005, Руководство пользователя

Страница: 6 / 12

EN
WWW.NAKAYAMATOOLS.COM
6
Charging a cold battery pack
A cold battery pack may be placed directly onto the charger port but charging will not begin until the battery temperature warms to within acceptable
temperature range. When a cold battery pack is placed on the charger, the charger may indicate the pack is not ready to charge. Please refer to charger oper-
ator’s manual. When the battery pack warms to approximately room temperature the charger will automatically begin charging.
NOTE:
Longest life and best performance can be obtained if the battery pack is charged when the air temperature is between 18°C and 24°C. DO NOT charge
the battery pack in an air temperature below 0°C, or above 50°C. This is important and will prevent serious damage to the battery pack.
Charging indicator
Press the light button to check the battery pack whether needs to charge.
Light indicator
Status
Lit
Blinking
Off
The battery is at full capacity
The battery is at 75% capacity
The battery is at 50% capacity and
requires charging.
The battery is less than 25% capacity
and requires charging soon.
WARNING!
Malfunctions may occur when the four lights blinking in turns.
NOTE:
1) Red LED and green LED flash alternately at a frequency of 1Hz indi-
cates the abnormal temperature of battery.
2) Red LED flashes at a frequency of 1Hz but green LED off when abnormal
voltage come to the battery.
Overheat protection
When the tool/battery is overheated, the tool stops automatically. In this situ-
ation, let the power tool/battery cool before turning the tool on again.
Over-discharge protection
When the battery capacity is not enough, the tool stops automatically. In this
case, remove the battery from the tool and charge the battery.
* The manufacturer reserves the right to make minor changes to product design and technical
specifications without prior notice unless these changes significantly affect the performance and
safety of the products. The parts described / illustrated in the pages of the manual that you hold in
your hands may also concern other models of the manufacturer's product line with similar features
and may not be included in the product you just acquired.
* Please note that our equipment has not been designed for use in commercial, trade or industrial
applications. Our warranty will be voided if the machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
* To ensure the safety and reliability of the product and the warranty validity, all repair, inspection,
repair or replacement work, including maintenance and special adjustments, must only be carried
out by technicians of the authorized service department of the manufacturer.
* Always use the product with the supplied equipment. Operation of the product with non-provided
equipment may cause malfunctions or even serious injury or death. The manufacturer and the
importer shall not be liable for injuries and damages resulting from the use of non-conforming
equipment.
Maintenance
Cleaning
Transportation
Batteries
These batteries have been designed to provide maximum trouble-free life. However, like all batteries, they will eventually wear out. Do not disassemble
battery pack and attempt to replace the batteries. Handling of these batteries, especially when wearing rings and jewellery, could result in a serious burn.
To obtain the longest possible battery life, we suggest the following:
- Remove the battery pack from the charger once it is fully charged and ready for use.
Unplug before any cleaning work. Keep this battery pack free of debris and dirt. Wipe down the equipment with a cloth and/or compressed air. It is highly
suggested that you clean the device after every use.
Take the battery pack from the tool, and place it into a box avoid being exposed to sunlight during the transportation.
Not forget the charger when the battery is transported.
Allowed temperature range is between 0°C and 50°C during the transportation.
Protect the battery pack from any heavy impact or strong vibrations which may occur during the transportation in vehicles.
Do not take or send the battery pack by airplane.