Nakayama PRO EC3005, Руководство пользователя

Страница: 5 / 12

EN
WWW.NAKAYAMATOOLS.COM
5
* Please make sure to use the appropriate Nakayama Pro
charger in order to charge the batteries.
Intended use
Description of main parts
Operating instructions
Technical data
● Follow all charging instructions and do not charge the battery pack outside the temperature range specified in the instructions. Charging improperly or at
temperatures outside the specified range may damage the battery and increase the risk of fire.
Service
● Have you battery pack serviced by a qualified repair person using only identical replacement parts.
● Never service damaged battery packs. Service of battery packs should only be performed by the manufacturer or authorized service providers.
Thank you for purchasing this product. Please read through these operating instructions and keep them for future reference.
Use this battery pack only for the intended tools.
If the product is damaged or has any defect, please do not use it and bring back it to your dealer.
If you give this tool to another people, please give him also this instruction manual.
* Please note that our equipment has not been designed for use in commercial, trade professional usage or industrial applications.
Type A: (picture A)
1: Upper cover
2: Lower cover
3: Light indicator
4: Light button
5: Unlock button
Type B: (picture B)
1: Upper cover
2: Unlock button
3: Light button
4: Light indicator
5: Lower cover
Voltage: 20V
Capacity: 4.0Ah
WARNING!
Before using your battery pack be sure to read the instruction manual carefully.
This battery pack has been shipped completely assembled. Carefully remove the battery pack from the box.
When to charge the battery pack
This battery pack is shipped in a low charge condition to prevent possible problems. Therefore, you should charge prior to first use.
This battery pack can be charged at any time. It is necessary to press the light button to see whether the battery pack needs to be charged.
When charging, it is important to provide adequate ventilation to avoid this battery pack becomes damaged.
How to charge the battery pack
WARNING!
This Lithium-Ion battery pack is shipped partially charged. Fully charge the battery pack before using it for the first time.
Charge the Lithium-Ion battery pack only with the correct charger.
Connect the charger to a power supply, the light indicator of the charger turns red.
Align the raised ribs of the battery pack with the slot in the charger (Fig. 3).
Insert the battery pack into the charger, the light indicator of the charger turns green and it flashes.
The charger will communicate with the battery pack to evaluate the condition of the battery pack.
How to remove the battery pack from the charger
It is fully charged that the four lights of the battery turn on.
Disconnect the power supply from the charger.
Remove battery pack from the charger.
How to remove the battery pack from the tool
Make the tool stop completely.
Press the unlock button on the battery pack and slide battery pack from the tool.
Charging a hot battery pack
When using a tool continuously, the battery pack may become hot. A hot battery pack may be placed directly onto the charger port but charging will not be-
gin until the battery temperature cools to within acceptable temperature range. When a hot battery pack is placed on the charger, the charger may indicate
the pack is not ready to charge.
Please refer to charger operator’s manual. When the battery pack cools the charger will automatically begin charging.