Nakayama EB1000, Руководство пользователя

Страница: 3 / 26

3
WWW
.N
AKAYAMA
T
OOLS
.
COM
Danger of injury from flying parts! Always maintain a sufficiently safe distance.
Beware of thrown objects.
The distance between the machine and bystanders should be at least 15 meters.
Beware of blade thrust.
Recycle unwanted materials instead of disposing of them as waste. All tools, hoses and packaging should be
sorted, taken to the local recycling centre and disposed of in an environmentally safe way.
Safety warnings
IMPORTANT!
READ CAREFULLY BEFORE USE!
KEEP FOR FUTURE REFERENCE!
WARNING — when using the machine the safety rules must be followed. For your own safety and bystanders please read
these instructions before operating the machine. Please keep the instructions safe for later use.
If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in
order to avoid a hazard.
Safe operating practices
Training
a) Read the instructions carefully. Be familiar with the controls and the correct use of the machine.
b) Never allow children or people unfamiliar with these instructions to use the machine. Local regulations can restrict the
age of the operator.
c) Keep in mind that the operator or user is responsible for accidents or hazards occurring to other people or their property.
Preparation
a) Before use check the supply and extension cord for signs of damage or aging. If the cord becomes damaged during use,
disconnect the cord from the supply immediately. DO NOT TOUCH THE CORD BEFORE DISCONNECTING THE SUPPLY. Do
not use the machine if the cord is damaged or worn.
b) Before use, always visually inspect the machine for damaged, missing or misplaced guards or shields.
c) Never operate the machine while people, especially children, or pets are nearby.
Operation
a) Keep supply and extension cords away from cutting means.
b) Wear eye protection and stout shoes at all times while operating the machine.
c) Avoid using the machine in bad weather conditions especially when there is a risk of lightning.
d) Use the machine only in daylight or good artificial light.
e) Never operate the machine with damaged guards or shields or without guards or shields in place.
f) Switch on the motor only when the hands and feet are away from the cutting means.
g) Always disconnect the machine from the power supply (remove the plug from the mains):