Nakayama EB1000, Руководство пользователя, Страница: 13 / 26

13
WWW
.N
AKAYAMA
T
OOLS
.
COM
Maintenance
Before carrying out any maintenance operations, cut off the electric power supply by disconnecting the plug from the
extension cable.
• Regular cleaning and maintenance of you grass trimmer / brush cutter will ensure efficiency and prolong the life of your
machine.
• After each cutting operation, take apart and clean out the grass and soil from the spool and its slot, the whole trimmer
and in particular the guard.
•
During operation, keep the air slots clean and free of grass.
• Only use a cloth soaked with hot water and a soft brush to clean the grass trimmer.
• Do not spray or wet the appliance with water.
• Do not use detergents or solvents as these could ruin the appliance. The parts in plastic can easily be damaged by
chemical agents.
•
If the line cutting blade no longer cuts or breaks, have this replaced by contacting an authorized service center.
•
For repairs which have not been explained in these instructions, contact an authorized service center.
Troubleshooting
CAUTION! Before every operation disconnect the electric power supply.
Storage
Follow these recommendations for storing the grass trimmer:
• Carry out general cleaning of the grass trimmer / brush cutter and its ancillary parts (see maintenance paragraph).
• Store it out of the reach of children, in a stable and safe position and in a dry place where the temperature is not too hot or
too cold.
•
Store the grass trimmer / brush cutter away from direct sunlight, if possible in a dark or barely lit place.
•
Do not store in a bag as this could encourage the formation of damp patches.
•
Do not store the grass trimmer / brush cutter resting on the floor. Hang it by the upper handgrip instead, so that the guard
does not touch anything. The resting of the guard on a surface could alter its shape and therefore its dimensions and safety
characteristics would be modified.
Problem Possible cause Remedy
Line will not advance
when tap bump button
Line is welded to itself Lubricate with a silicone spray
Not enough line on spool Install more line
Line is worn too short Pull lines while alternately
pressing down on and releasing
bump button.
Cutting head is hard to
turn
Grass wrapped or built up
around head.
Clean affected parts of the
machine.
Bump head is hard to run Grass wrapped or built up
around head
Clean affected parts of the
machine
Grass wraps around the
attachment shaft and the
trimmer head assembly
Cutting tall grass at ground level Cut tall grass from the top
down