Nakayama EB1000, Руководство пользователя

Страница: 10 / 26

10
WWW
.N
AKAYAMA
T
OOLS
.
COM
Instructions for Use
After reading the safety rules carefully, follow the instructions below attentively in order to get the most out of your grass
trimmer / brush cutter.
Start off slowly, when you have gained experience, you will be able to use the grass trimmer / brush cutter to its full
potential.
•
Put the shoulder strap over your shoulder opposite side to the unit .Adjust shoulder strap to most comfortable length.
•
Hold the grass trimmer / brush cutter with your right hand on the trigger handle and your left hand on the front handle.
NOTE: Keep a firm grip with both hands during operation. (Fig.13)
• Place the grass trimmer / brush cutter on the side your body with the motor behind and away from your body. (Fig.13)
Fig.13
• To start the grass trimmer / brush cutter, first press the lock-off button (4), whilst holding the lock-off button, press the
On/Off switch (3). To stop the grass trimmer / brush cutter, simply release the On/Off switch (3). (Fig.1)
Cutting
• Cut the grass by moving the grass trimmer from right to left.
• Cut grass or weeds over 20cm tall from the top to the bottom in small amounts. This will prevent grass becoming
wrapped around the trimmer head assembly, which may result in damage due to overheating. If grass becomes wrapped
around the trimmer head assembly. Stop the trimmer, unplug it and remove the grass.
• The cutting blade turns anti-clockwise, so it is advised to use the unit from right to left to make an effective cut. Ensure
the people present are at least 15 meters away.
•
Move the grass trimmer / brush cutter slowly in and out of the area you are cutting, keeping the grass trimmer / brush
cutter at the desired cutting height.
• Do not cut damp or wet grass. Dry grass will give excellent results.
• Always let the nylon line / cutting blade rotate at top speed; do not work in such a way as to overload the grass trimmer
/ brush cutter.
•
Caution! Do not use the grass trimmer / brush cutter without the guard.
•
Never pass the grass trimmer / brush cutter over the extension cable while the grass trimmer is running; make sure it is
always in a safe position behind your back.
• Before starting work, make sure that the area to be cut is free of stones, debris, wires and any other objects.
Change to edging mode (Fig.14 & Fig.15 & Fig.16)
To cut he edges of lawns and flower beds, the grass trimmer can be converted as follows:
1. Release the knob (8), press the lock button (c) and holding it.
2. Turn the attachment shaft (9) 90° by clockwise direction or counterclockwise direction until the lock button to lock into
place.
3. Tighten the knob (8).